PTERYX XT DIVING PRO ANDREA ZUCCARI CARBON FINS

 

PTERYX ANDREA ZUCCARI 

XT DIVING PRO CARBON FINS

 

PINNE IN CARBONIO PTERYX ANDREA ZUCCARI

There are no best fins in absolute terms but fins that better meet user’s needs and better match with the kind of diving user do. Pteryx Zuccari are more suitable for deep freediving and require a close but frequent kicking. The manufacturer himself mainly designed them for this purpose while  the T5 Vasiliou would rather be more suitable for spearfishing (even at depths greater than 30mt), nevertheless both habits and technique (as well as training level) of the user must be considered in order to be able to do a more complete and appropriate evaluation.

 

As we mentioned above the Zuccari Pteryx fins are not really aimed to be used for spearfishing but if the spearo diver is keen to generate less force with his legs during the descent/ascent then this model is the right choice. However it turns to be it  a little less if he is not well trained and has not a good technique.

 

Zuccari pteryx are particularly suitable for deep dives due to their own structure. They are 19.5cm wide (overall measure) and 72cm long (longer thrust surface). They have a slightly concave tip profile and are made entirely of 100% carbon twill and bent with an angle of 29 degrees.

 

The very low water rails (1.5cm) which run along almost the entire length of the blade and leave very little space to the KM DIVE footpocket arms (it is however possible order fins also in pathos or C4 ones for example) trimmed to a length of about 15cm, enormously contribute to a great flexibility. However, the most important role is played by the particular progressive thickness framework (decreasing from the footpocket toward the tip) and the layout of the carbon fibers. It is in fact possible to notice, by orientating the blades in backlight, how the fibers are arranged with a V-design, creating a thinner triangle in the end portion.

 

The combination of these characteristics makes them particularly flexible, so as to make them resonate widely if gently swayed in the air. However, user is requested to be well trained to exploit such a greatness.

The fins made by the XT DIving can all be classified according to the type of curvature they obtain if subjected to the effect of the kick. As you can see from the table below, the carbon structure, clearly different for each fin, flexes in different points favoring one use rather than another. In general, we can say that the fins that bend towards the beginning of the blade (foot pocket side) are more suitable for those who have a good training and a good technique.


PTERYX XT DIVING PRO ANDREA ZUCCARI PINNE IN CARBONIO  

This is a special model as the production process is particularly long and requires 8 days between high temperatures and high pressure. This also makes them the most expensive product in the XT DIVING range.

 

PTERYX XT DIVING PRO ANDREA ZUCCARI CARBON FINS BLADE VOILURE PALME CARBONE PINNE PALA CARBONIO APNEA PESCA CHASSE SOUS MARINE FREE DIVING SPEARFISHING

 

PTERYX XT DIVING PRO ANDREA ZUCCARI PINNE IN CARBONIO  PTERYX XT DIVING PRO ANDREA ZUCCARI PINNE IN CARBONIO  PTERYX XT DIVING PRO ANDREA ZUCCARI PINNE IN CARBONIO  PTERYX XT DIVING PRO ANDREA ZUCCARI PINNE IN CARBONIO 
PTERYX XT DIVING PRO ANDREA ZUCCARI PINNE IN CARBONIO PTERYX XT DIVING PRO ANDREA ZUCCARI PINNE IN CARBONIO    

 

 

 

 

 

Joomla visitor tracking and live stats