NEW SPEARGUN SIGAL SUB NEMESIS

 

NEW SPEARGUN SIGAL SUB NEMESIS

AVAILABLE FROM MAY

 

 

For many years Sigalsub has pampered us with high quality products designed and made with care by those who actually get personally in the water. The accessories that in the last years have offered us, have solved small problems arising from the use of weapons of other producers or have however facilitated their use but what has always been missing in its catalog was its own speargun.

 

A weapon designed to include all those small solutions that over the years had been made for the competitors and that could be customizable to all types of spearos without compromises on quality and after 2 and a half years we are ready to touch it with our hands.

 

The key principle of this project is to become customizable according to our own needs without having to worry about finding alternative solutions or components because it has already been fully considered and is already available. For example, the speargun is marketed as standard with a traditional mono or double band muzzle (depending on the model chosen) but if you want to turn it into a fusion/demo an alternative muzzle with aluminum stopper is available while on the handle there is already a robust hook for pre-tensioning. So let's find out in detail the nemesis.

 

 

HANDLE

 

The real jewel of this speargun is the handle made of nylon loaded with 30% glass fiber while for the area of larger contact with the hand was considered a soft material for greater comfort of the user. The mechanism is particularly backward and is equipped with an line-releaser that can be positioned both on the right and on the left side. Its very soft trigger is designed to withstand exaggerated loads like multi-bands or roller. It is equipped as standard with two plastic adapters which are designed to cope with the different sizes of the hand and the use (depending on the season) of more or less thick gloves. In fact, these adapters bring the distance from the handle to the trigger, from the normal 64mm to 67mm and finally to 70mm, in this way our grip will always be effective and comfortable. In the upper part a notch has been provided to house the fingers that pull the rubber bands at the moment of hooking on the shaft and practically on the handle butt, behind the mechanism, was fit the stirrup of the cam. Normally, the holes used to fix the screws of the stirrup house some little hexagonal screws which must be removed before you can fix the stirrup. In the front part above the reel has been designed a strong hook for the pre-tensioning of rubber bands, indispensable in the configuration of fusion, inverter, demo, etc. The handle is connected by a male coupling (double o-ring) in a barrel with a 28mm circular section.

 

 

sigalsub nemesis  sigalsub nemesis  sigalsub nemesis   sigalsub nemesis
 sigalsub nemesis  sigalsub nemesis  sigalsub nemesis  sigalsub nemesis
 sigalsub nemesis  sigalsub nemesis  sigalsub nemesis  sigalsub nemesissigalsub nemesis

 

BARREL

The barrel is made of extruded aluminum but later (not shortly, however) rumors confirm that a carbon version will be available. Also for this component of the weapon some important tricks have been realized. At the top is equipped with an integrated shaft guide that runs for its whole length, designed to have the least possible contact surface with the shaft. In fact, the shaft touches only two points on the right and on the left while the central part never touches the shaft guide because the latter has been designed to form a sort of channel that allows water to flow thus reducing any friction. In the lower part of the barrel it is instead possible to notice two very accentuated ribs / edges which are quite unusual on a circular barrel and therefore do not go unnoticed. In addition to having an attractive aesthetic effect, together with the upper shaft guide, further contribute to stiffen the barrel allowing it to withstand important loads without bending.

 

MUZZLE

The muzzle is open, slender and essential with a single or double hole of 16mm (avoiding the large single slot that creates friction between the rubber bands) and includes hooks for the passage of the line both on the right and on the left. As previously indicated if you want to switch to a fusion, inverter or demo you can mount another muzzle that has the advantage of being able to turn from a fusion to a traditional with C4 hooks easily without demanding work, however this product will be the object of a separate article.

 

WEIGHTS AND MEASURES

the model that we have analyzed is the 104cm that naked (without shaft and bands but with reel) weighs only 720gr. the overall length is 119cm. The useful run of the bands is 102.5cm for the first and 104cm for the second. The video stirrup weights 24gr and if you want to go “fusion” the muzzle weights is only 86gr.

 

CONFIGURATIONS

The speargun is available in both black and military green and is equipped as standard with shaft, rubber bands and reel. According to your needs it is available in the following versions and fittings. The video stirrup and the stark muzzle are considered optional accessories not included.

 

 

 

 

NEMESIS

 

9500-NMS/076N

76

1x Reactive 16,0mm + shaft 110cm 6,25mm

9500-NMS/082N

82

1x Reactive 16,0mm + shaft 115cm 6,25mm

9500-NMS/092N

92

1x Reactive 17,5mm + shaft 125cm 6,25mm

9500-NMS/104N

104

1x Reactive 17,5mm + shaft 135cm 6,25mm

 

 

 

 

NEMESIS PRO BLACK/GREEN

 

9600-PRO/076N

76

2 X Reactive 14,5 + shaft Ghost 110cm 6,5mm

9600-PRO/082N

82

2 X Reactive 14,5 + shaft Ghost 115cm 6,5mm

9600-PRO/092N

92

2 X Reactive 14,5 + shaft Ghost 125cm 6,5mm

9600-PRO/104N

104

2 X Reactive 14,5 + shaft Ghost 135cm 6,5mm

9600-PRO/116N

116

2 X Reactive 14,5 + shaft Ghost 150cm 6,5mm

 

 

 

 

NEMESIS PLUS BLACK/GREEN

 

9700-PLUS/092N

92

2 X Reactive 16,0 + shaft 125cm 6,75mm

9700-PLUS/104N

104

2 X Reactive 16,0 + shaft 135cm 6,75mm

9700-PLUS/116N

116

2 X Reactive 16,0 + shaft 150cm 6,75mm

 

 

 

 

 

Joomla visitor tracking and live stats